1. Wash hands thoroughly with soap and water.

  2. It is important that the surfaces to which the resin adhesives will be applied are clean and degreased properly, taking care NOT TO USE DENATURATED ALCOHOL or SILICONE-BASED PRODUCTS..

    The choice of cleaner also depends on the parts to which the stickers will be applied. On porous plastic surfaces such as handguards, mirrors and fenders, it is advisable to use a universal degreaser, for Plexiglas parts such as the windshield you can use a specific glass cleaner, for body parts or smooth surfaces you can use a universal cleaner.

  3. Wait some time to get a perfectly dry surface.

    Make sure that the surface is perfectly dry and that any alcohol residue totally evaporates, especially in porous areas.

  4. Handle the adhesive from the edges only, avoiding touching the adhesive part with your hands.

  5. Apply the sticker, taking care of its position and keeping it perfectly aligned with the outline of the vehicle.

    Avoid “stick-and-go” actions that would compromise the glue’s hold over time (we recommend starting on one side and gently removing any air bubbles as you proceed to the opposite side).

  6. Once applied, using the warm air from a hair dryer, give the adhesive time to adhere well.

    We recommend not using the bike or washing it for at least 24 hours to allow the glue to harden.

  7. Leave us feedback

    Once the stickers have been applied, review our products on our partner site:

    Lasciaci un feedback

  8. Follow us on our social media

    CLICK to discover the latest Resin Bike news!

    adesivi-resinati-3d-resinbike-feedaty adesivi-resinati-3d-resinbike-feedaty adesivi-resinati-3d-resinbike-feedaty adesivi-resinati-3d-resinbike-feedaty